MainRegistrationLogin Electro-Hobby Saturday, 10.12.2022, 04:50
  Circuits Welcome Guest | RSS



Total online: 1
Guests: 1
Users: 0

  Main » Basic Electronics

If you are someone who enjoys doing your own home improvement and you are working with electronics during the process, having access to a multimeter is an absolute must.   ... Read more »
Category: Basic Electronics | Views: 1642

A diode can fail in one of four ways. It can become open, shorted, leaky and intermittent. Just by using an analog meter, it can measure almost all of the symptoms except the intermittent failure. If you suspect the diode have intermittent problem, just direct replace it since diode replacement is quite easy to get and cheap too. Make sure you power off the equipment before checking it with your meter.
Category: Basic Electronics | Views: 1389

A DC-to-DC converter is a device that accepts a DC input voltage and produces a DC output voltage of different voltage level than the input. There are two types of dc to dc converter circuits found in the CRT monitors.   ... Read more »
Category: Basic Electronics | Views: 1459

There are many methods of testing capacitor. It depends on individual as what type of testing equipment they want to use. Some prefer the old way while some are using the latest and expensive equipment.   ... Read more »
Category: Basic Electronics | Views: 1669

Checking capacitor with ohm meter can be done by using an analog meter. I know that ESR meter is the best meter to check capacitor (electrolytic) but somehow you also need to use an analog meter to test it.   ... Read more »
Category: Basic Electronics | Views: 1610

1 2 3 4 »

Copyright MyCorp © 2022
Free web hostinguCoz